This undertaking “Container Washing Machine” manages the cleaning of jugs utilized for pressing soda pops. This undertaking will be very helpful when executed in soda pops producing organizations as containers are gathered and reused for pressing. As of late the Cleanliness of these containers had acquired a quality issue which prompts the lessening in deals for these sodas. Henceforth such a task which computerizes the cleaning of containers may be of some assistance gave the water used to object is as often as possible changed and checked.This venture manages the creation of a straightforward model of the unit, which utilizes pneumatic segments which are controlled by a Solenoid valve and Control Timing Unit.


This is a period of mechanization where it is comprehensively characterized as substitution of manual exertion by mechanical power in all degrees of robotization. The activity remains a fundamental piece of the framework in spite of the fact that with changing requests on physical contribution as the level of motorization is expanded.


The framework has a twofold acting pneumatic barrel which is being activated utilizing pneumatic control segments, for example, heading control (5/2 Solenoid Valve) and stream control parts which are controlled through Electronic Control Timing Unit. The chamber causes the containers to be drenched inside the water in the tank and afterward flushes it to wash the jug. The situation of the barrel is detected by turn OFF the planning control unit and is given to hold the jugs in the inundated condition to enable water to go into the container. In the wake of filling the Water to the contains are disturbed by the and down development of the actuator (Switch ON the Timing Control Unit), and after that, the water inside the jug is evacuated by suspending the jug.

The Solenoid Valve causes us for the forward and turns around the movement of the chamber. By leaving the loop of the solenoid DC Valve, we can accomplish this. The stream control valve here controls the speed of the actuator. This valve is physically controlled. The Timing Control Unit is the insight of the framework. It controls the whole capacity of the machine. After at least ten checks of here and there, the machine will stop. The jugs are emptied to be stacked with a crisp arrangement of jugs.


1. The Bottle can be effortlessly washed.

2. Two or Three Bottle are Cleaned at once.

3. Handling is simple

4. Less Manual power

5. Time Saving and High Production System.

6. Replacement of parts are simple


 Cost of the hardware is high.

 This framework requires high systems of support mind.

 Care must be taken for the dealing with the gear, for example, appropriate wiring association, and so on.


This is extremely helpful in

Mineral Water Plant Industries

Cool Drinks Industries

Manufacturing plant, and so on.


Leave a Reply

Your email address will not be published. Required fields are marked *