ABSTRACT:
This undertaking work titled “PNEUMATIC LIFTING TABLE” has been considered having contemplated the trouble in lifting any sort of light vehicles and additionally the materials from on ventures. Our review in the respect in a few car carports uncovered the realities that generally some troublesome strategies were embraced in lifting the vehicles/materials for reconditioning.
Presently the undertaking has basically focused on this trouble, and thus an appropriate game plan has been outlined. To such an extent that the vehicles can be lifted from the floor arrive without the use of any effect drive. By squeezing the catch, the solenoid valve actuated. The packed air is going to the pneumatic barrel through the solenoid valve. The smash of the pneumatic barrel is go about as a jack.
The car motor drive is coupled to the compressor motor, with the goal that it stores the compacted air when the vehicle running. This compacted air is utilized to initiate the pneumatic barrel when the catch is actuated.
PRESENTATION:
This gadget the pneumatic lifting table for light vehicle carports has been created to later the requirements of little and medium car carports. In the greater part of the carports, the vehicles are lifted by utilizing screw jack. This needs high labor and gifted works.
Degrees of computerization are of two kinds, viz.
Full computerization.
Semi computerization.
REQUIREMENT FOR AUTOMATION:
To accomplish high well-being
To diminish labor
To increment the productivity of the vehicle
To decrease the work stack
To decrease the vehicle mishap
To decrease the weariness of laborers
To high obligation
Less Maintenance cost
WORKING PRINCIPLE:
The dash cushion switch was enacted at the season of any breakdown condition. The control flag is given to the solenoid valve when the catch is actuated. The packed air goes to the solenoid valve.
The solenoid valve is initiated at the season of dash cushion catch “ON”. The packed liquid (oil) goes to the pneumatic barrel. The compacted air pusses the pneumatic barrel cylinder and push ahead. The RAM is settled toward the finish of the pneumatic chamber. The cylinder moves towards upward and the smash is lifting the vehicle upwards. The solenoid valve is deactivated at the season of dash cushion catch “OFF”. The pneumatic barrel air goes to the environment through fumes port.
ADVANTAGES:
It requires basic support cares
The stacked light vehicles can be effortlessly lifted.
Checking and cleaning are simple, due to the primary parts are screwed.
Handling is simple.
Manual control not required
Repairing is simple.
Replacement of parts is simple.
Maximum tallness up to 1 foot can become too.
DISADVANTAGES:
1. Initial cost is high.
2. High upkeep cost.
3. Separate air tank or compressor is required.
APPLICATIONS:
It is especially helpful for Car Owners and Auto-carports. This pneumatic lifting table is utilized for lifting the vehicles.
Thus it can be helpful for the accompanying sorts of vehicles;
1) MARUTI, 2) AMBASSADOR,
3) FIAT, 4) MAHINDRA,
5) TATA
All little scale businesses
DOWNLOAD: PNEUMATIC LIFTING TABLE
