AUTOMATIC SIDE STAND WITH BREAKING LOCKING SYSTEM
This venture work titled “Programmed SIDE STAND WITH BREAKING LOCKIG SYSTEM” has been imagined having examined the trouble in standing the any sort of bike vehicle. Our study in the respect in a few car carports, uncovered the certainties that for the most part some troublesome techniques were received in standing the vehicles in rest.
Presently the undertaking has predominantly focused on this trouble, and consequently an appropriate water powered unit has been planned. To such an extent that the vehicles can be stand the floor arrive without use of any effect constrain. By squeezing the catch in the dashboard, the solenoid valve initiates the pressure driven jack naturally. The creation part of it has been considered with nearly case for its straightforwardness and economy, to such an extent this can be suited as one of the basic devices on vehicle carports.
This gadget the bike Pneumatic remain for standing the vehicle carports has been produced to later the requirements of bike car carports. In a large portion of the carports the vehicles are remaining by utilizing spring with liver stand. This needs high labor prerequisite and effect powers.
So as to keep away from every such impediment, this bike pneumatic stand has been outlined such that it can be utilized to stand the vehicle easily with no effect drive. The activity is made be basic that even any individual can took care of, by simply squeezing the catch.
The dash cushion switch was initiated at the season of any breakdown condition. The control flag is given to the solenoid valve, when the catch is initiated. The oil is goes from the compressor to the solenoid valve through stream control valve.
The solenoid valve is actuated at the season of dash cushion catch “ON”. The packed liquid (air) goes to the water driven chamber. The compacted air pusses the pneumatic chamber cylinder and advance. The RAM is settled toward the finish of the single acting pneumatic chamber. The cylinder moves towards the ground and the slam is standing the vehicle. The solenoid valve is deactivated at the season of dash cushion catch “OFF”. The pneumatic barrel liquid (air) goes to the environment through solenoid valve.
It requires straightforward upkeep cares
The moving parts of this framework are cooled by the oil itself utilized. Along these lines this undertaking does not require any cooling plans.
The stacked vehicles can be standing effectively.
Checking and cleaning are simple, in view of the fundamental parts are screwed.
Handling is simple.
Manual control not required
Repairing is simple.
Replacement of parts is simple.
Maximum stature up to 1.5 feet can be come to.
1. Initial cost is high.
2. High upkeep cost.
It is especially helpful for vehicle Owners and Auto-carports. This programmed pressure driven stand is utilized for standing the vehicles.
Thus it can be helpful for the a wide range of bikes.